Guitar Sunburst

Guitar Sunburst
From virtual to real rocker
Fender, maker of the famed Stratocaster guitar, is reaching out with new digital tie-ins to lure the gamer generation into playing real music.
Check out these great Guitar Sunburst deals by Clicking On The Blue Links Below

Fender started to produce the Stratocaster or Strat in the spring of 1954.

The earlier vintage 1954 Strats, are slightly different than later 1954 Strats. Some of the most obvious noticeable traits of the very first production are:

• Serial number are on the plastic tremolo cover plate instead of the metal neck plate.

• The Bakelite knobs are a slightly different shape, with smaller "skirts".

• The Strat case is shaped like the guitar (known as a "poodle" case) instead of center pocket rectangular tweed.

Early Strats are made from one piece Ash bodies which make the weight of the guitar to be medium to light, which is fairly rare. Generally 1954 models tend to be heavy. Ash bodies were used on Fender Strats until mid-1956, when Fender switched to Alder (for all colors except Blond). 

In addition, Fender finished the sunburst Ash bodies slightly different than how they finished Alder sunburst bodies, so the overall look of the sunburst from those years are slightly different.   Fender didn't always put a body date in the pot of the Stratocaster. Sometimes it's in the middle pickup route on the front of the body. By the early 1960's, body dates were no longer stamped on the serial number. It is very rare to find any Fender with a body date from the 60's in the electrical pot.  

Fender maintained putting dates on the neck until about 1970, but the signing of the neck by the craftsmen stopped around 1955 or 1956, so if you see initials or signatures you will be aware of how old the strat might be.  

There should be "nail holes" in the Strat body. Nails were used to hold the body when it was being painted. A finish nail is driven into the body at four positions to act as "feet" to elevate the body during finish spraying, to allow it to dry without touching the table. Later the nails are removed and discarded. The four nail holes should always be evident and NOT filled with paint! If the nail holes are missing or have paint in them, the body was refinished. Fender used this nail technique until about late 1964.

Underneath the single layer pick guard. All white single layer Fender pick guards from 1954 to 1959 were made from a new material (at that time) called ABS or vinyl. These pick guards are not Bakelite! (Though the knobs and pickup covers are often called "Bakelite", they are actually polystyrene). The small aluminum shielding plate under the pots and switch increased in size and decreased in thickness in 1959.

On the back of the peg head there is a tooling hole underneath the tuners, between the "G" and the "D" tuner. This hole was used when the neck was made. Fender maintained this tooling hole until the late 1960'.  

The back tremolo cover plate has string access holes that are round. Starting in early 1955, these holes changed to an oblong shape. This allowed the strings to be changed easier with this cover in place.

The Stratocaster tremolo as used from 1954 to early 1971. The bridge saddles are stamped "PAT. PEND." opposed to reissue Strat saddles which are stamped "FENDER FENDER" instead.  

If you would like to see more about the Fender Stratocasters Click Here!

Many thanks for reading our Guitar Sunburst article

• Wood Guitar
• Where to go for left handed guitars and left handed bass guitars? Part Three ? lefty Explorer Bass

Tagged with: amp • buy teisco et-230 guitar • Guitar • guitar sunburst • Guitars • teisco et-230 for sale